Heating · Greater Houston
Heater & Furnace Maintenance
Annual Tune-Ups That Pay for Themselves
A properly maintained heater runs more efficiently, lasts years longer, and is far less likely to fail on a cold night. Our licensed technicians perform a documented inspection, cleaning, calibration, and safety check on every visit.
- Licensed & Insured
- 5-Star Rated
- Same-Day Service
Gulf Coast cold snaps arrive without warning. Your heater should be ready.
When you live along the Gulf Coast, cold days tend to sneak up on you. Not having access to heat when you need it most is uncomfortable and, in some cases, dangerous — especially for young children and elderly family members.
Regular professional maintenance catches issues early before they escalate into costly failures. Our technicians identify what is brewing in your system long before it becomes an emergency.
Annual inspections also keep your manufacturer warranty valid and prevent the steady efficiency decline that comes with deferred care. Systems that skip maintenance lose five to ten percent efficiency per year.
Comprehensive maintenance, once a year, by a licensed technician.
Every visit covers a complete inspection, thorough cleaning, full calibration, and documented safety check — no partial visits, no abbreviated checklists. The same licensed technician completes each step before leaving your home.
We offer same-day scheduling during the fall maintenance rush and provide a written record of every task performed, including any deferred repairs we recommend for follow-up.
Safety Inspection Every Visit
More Than a Tune-Up
Every maintenance visit includes a full safety inspection — heat exchanger check, combustion analysis, gas pressure verification, and CO detection. We flag anything that needs attention before it becomes a hazard.
What's Included in Every Maintenance Visit
Thermostat Calibration
We verify your thermostat reads accurately and communicates correctly with the heating system to maintain consistent temperatures throughout your home.
Heat Exchanger Inspection
We examine the heat exchanger closely for cracks or corrosion that could compromise efficiency or allow carbon monoxide to enter the living space.
Burner Cleaning & Adjustment
Gas burners are cleaned and adjusted for a proper flame pattern and reliable ignition, which directly improves combustion efficiency and reduces gas consumption.
Air Filter Replacement
A fresh filter is installed to maintain proper airflow, reduce strain on the blower motor, and improve the indoor air quality your family breathes every day.
Safety Controls Testing
All safety switches, limit controls, and gas valve operations are tested to confirm the system is operating within manufacturer-specified safe parameters.
Carbon Monoxide Testing
We test for carbon monoxide in the flue gases and around the unit to confirm there are no dangerous leaks that could pose a health risk to your household.
When to Maintain Your Heating System
Early Fall
Schedule your annual professional maintenance visit before heating season begins. This is the best window to catch off-season wear and ensure the system is ready before the first cold night.
Before First Cold Night
Test the system by running it for fifteen minutes, replace the air filter if you did not do so at the annual visit, and clear any debris from around the outdoor unit or exhaust vents.
During Winter
Check the air filter monthly and replace it as needed. Keep the area around your furnace clear of stored items. Watch your energy bills for unexpected increases that may signal a developing issue.
End of Season
Document any issues you observed during the heating season and schedule deferred repairs before the following fall. Consider duct cleaning if you noticed unusual dust or odors throughout the winter.
Controls and Calibration
Thermostat Check Included
A heating system that heats correctly but cycles at the wrong time wastes as much energy as one that is out of tune. Every maintenance visit includes thermostat calibration and schedule review.
What Our Customers Say
“Weatherford came out the day before a cold front hit. They found a cracked heat exchanger and had it replaced the same week. Could not have asked for better timing.”
“They arrived on time, completed the full inspection, and left a written report of everything they checked. No upsells, just honest work. Will use them every fall.”
“Our furnace had been losing efficiency for two winters. After the annual tune-up our gas bill dropped noticeably the very next month. Wish we had started doing this sooner.”
Frequently Asked Questions
How often should I have my heater maintained?
Once a year is the standard recommendation, and early fall is the ideal time — before the heating season begins. That window lets us catch any issues from summer inactivity and ensure the system is ready before the first cold snap arrives.
What happens if I skip annual maintenance?
Efficiency typically drops five to ten percent per year without maintenance as components accumulate dirt and wear. Skipping documented annual service may also void your manufacturer warranty. The risk of an unexpected breakdown during peak heating demand increases significantly as well.
Do you service all brands?
Yes. Our technicians are licensed and trained across all major furnace and heating system brands, including Carrier, Lennox, Trane, Goodman, Rheem, Bryant, and others. We follow manufacturer specifications on every visit.
Related Services
Greater Houston
Your Local Weatherford Air & Heating Team
Licensed, insured, and background-checked technicians serving the Greater Houston area for over 40 years.
Call 281-XXX-XXXXSchedule your annual heating tune-up today.
Proactive maintenance keeps your system running safely, your warranty intact, and your energy bills predictable. Same-day scheduling available, licensed technicians on every visit.